Guides and Blog
Guides on high voltage, transformer, oil, battery and cable testing, with links to the matching Wrindu testing equipment.
Testing guides
These guides explain how common high voltage and power system tests work, what each test tells you about the equipment, and what to consider when choosing a tester. Each guide links to the matching Wrindu equipment.
- Battery Discharge Tester: Load Test and Capacity Guide
A practical guide to battery discharge testers: how a controlled load reveals voltage sag and real Ah, when to use a load bank or a built-in load, and how to check current safely.
- Cable Fault Locator: How to Find and Pinpoint Underground Cable Faults
Cable fault location explained: how pre-location distances, surge and acoustic pinpointing, route tracing and TDR measurement combine, and which Wrindu locator models suit each stage.
- Dielectric Withstand Voltage Test: How It Works and What It Verifies
How a dielectric withstand voltage test stresses insulation, how pass and fail results are read, and how to choose a withstand tester for transformers, cables and switchgear.
- Tan Delta Test: A Practical Guide for Transformers, Cables and Capacitors
A practical guide to the tan delta test: what dielectric loss measures, how tangent delta tests are run on transformers, cables and capacitors, how to choose a tester, and the Wrindu models that cover the measurement.
- Transformer Oil Tester: A Guide to Oil Testing and Dissolved Gas Analysis
A guide to transformer oil testing, covering breakdown voltage, moisture, dielectric loss, gas content and dissolved gas analysis, plus Wrindu instruments for oil testing and DGA.
- Partial Discharge Test Equipment: A Practical Guide for Buyers
A buyer’s guide to partial discharge test equipment: how PD tests work, when online scanning or continuous monitoring fits, cable and transformer testing, and the Wrindu PD instruments for each role.
- Power Quality Analyzer: What It Measures and How to Choose One
What a power quality analyzer measures, how analysis differs from monitoring, and how to choose a three-phase instrument for panels, substations and plant surveys, with Wrindu supply and support details.
- Series Resonant Test System: Working Principle, Tests and Selection
How a series resonant test system works, which parameters to specify for cable, switchgear and substation testing, and how Wrindu supplies and supports these AC withstand test sets.
- Transformer Turns Ratio Tester: What a TTR Test Tells You
A guide to transformer turns ratio testers: what ratio and vector group measurements show, how a TTR test is run on site, and how to choose a Wrindu model for field or factory work.
Equipment pages by test area
Request a quotation
Tell us the equipment you need to test, its voltage level and the tests required.
Or write to sales@hipottestequipment.com